Minelab Quattro MP Metal Detector

The Quattro MP Metal Detector is an easy to use yet extremely powerful multi-purpose metal detector. It features remarkable depth detection for an:

• Accurate identification of targets to greater depth
• Enhanced detection of desired targets amidst iron "trash"
• Enhanced detection capabilities when searching salt-water beaches

The Quattro MP features a 28 frequency Full Band Spectrum (FBS) circuit that automatically transmits multiple frequencies simultaneously. This increased frequency range means that the signal received from the detector coil is analyzed from a wide range of responses. This information is relayed to the operator via the speaker or headphones and the control panel's liquid crystal display as an audio or visual target response. Simply put, this unique FBS technology means deep, sensitive, accurate detecting. It also means:

• Consistent sensitivity over a wide range of targets
• Less interference from electromagnetic sources
• More accurate identification of target characteristics

The Quattro MP uses a sophisticated approach to the elimination of signals caused by ground mineralization. Unlike other forms of ground balance that requires constant readjustment, FBS technology uses advanced digital filtering to eliminate the influence of ground signals.

Other features of the Quattro MP Metal Detector include:

• A maximum length of 55 inches
• Minimum length of 43 inches
• Shaft mounted configuration
• 10.5 inch coil
• 51 accept/reject target selections
• Internal speaker or headphone audio output
• 1/4 inch stereo jack headphone input
• Multiple transmit frequencies (1.5, 3, 4.5&.100kHz)
• Ground compensation with advanced digital filtering
• Linear -10 to +40 discrimination options
• 64 x 128 pixel liquid crystal display (LCD)